Advertisement
Important:
If the cooktop is being installed on a built-in oven, the oven should be placed on two wooden strips and if
●
placed on interior cabinet surface, remember to leave an opening of at least 45 x 560 mm from the back
side.
When installed on a built-in oven without forced ventilation, air inlets and outlets are required for proper
●
cabinet ventilation.
Gas connection for gas hob
Gas appliance should always be connected to the gas supply by an authorized installer. During installation
it is essential to install an approved gas valve to isolate the supply from the appliance for future needs.
Connection must be done in accordance with the local regulating laws and make sure cooktop is preset to
be used with same kind of gas that is being supplied/connected.
Important: The pressure regulator that is included with your appliance is adjustable and has been
preset to your cooktop. It MUST be attached to the cooktop and used regardless of the gas source.
If your gas source is a LPG tank, a standard pressure regulator MUST be present as well at the tank
outlet.
Important: For safety and proper functioning of the appliance, gas pressure must conform to the
specifications given in table 1 "Burners and Nozzle Specifications".
Connection to non-flexible tube
(copper or steel)
Connection to the gas source must be done in such a way as to not to create any stress points to any
●
part of the gas cooktop.
Cooktop is supplied with an adjustable "L" shape connector and a gasket.
●
Connector should be dismounted and the gasket must be replaced.
●
Gas feeding connector is threaded 1/2".
●
12
Hide quick links:
Advertisement
