Snapper EYZ16335BVE Safety Instructions & Operator's Manual
  1. Manuals
  2. Brands
  3. Snapper Manuals
  4. Lawn Mower
  5. EYZ16335BVE
  6. Safety instructions & operator's manual
Snapper EYZ16335BVE Safety Instructions & Operator's Manual

Snapper EYZ16335BVE Safety Instructions & Operator's Manual

European scrambler hydro drive series 5
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL DESIGNATION
DRIVE SYSTEM TYPE
ENGINE HORSE POWER
CUTTING WIDTH
E – European Model
16 - 16 HP Engine
Y – SCRAMBLER
Z – Zero Turning Radius
Thank you for buying a SNAPPER Product! Before operating your SCRAMBLER, read this manual carefully
and pay particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 - 4. Remember that all
power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense!
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
Safety Instructions & Operator's Manual for
MODEL NUMBER EXPLANATION
E
Y
Z
33 - 33" Cutting Deck
16
33
5
5 - Series Designation
1
EUROPEAN
SCRAMBLER

HYDRO DRIVE

SERIES 5
MODELS
EYZ16335BVE
B
V
E
ENGINE OPTIONS
SERIES DESIGNATION
B - Briggs Engine
V – Over Head Valve
MANUAL No. 7-5559 (I.R. 10/18/03)
ENGINE TYPE
E - Electric Start

Advertisement

Table of Contents
loading

Related Manuals for Snapper EYZ16335BVE

Summary of Contents for Snapper EYZ16335BVE

  • Page 1: Hydro Drive

    Y – SCRAMBLER Z – Zero Turning Radius Thank you for buying a SNAPPER Product! Before operating your SCRAMBLER, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power equipment can be dangerous if used improperly.

  • Page 2: Important Safety Instructions

    If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).
  • Page 3 14. Exercise CAUTION when pulling loads. Limit loads to those you can safely control and attach loads to hitch plate as specified with SNAPPER attachment instructions. 15. On slopes, the weight of the towed equipment may cause loss of traction and loss of control.
  • Page 4 14. Have machine serviced SNAPPER dealer at least once a year and have the dealer install any new safety devices. 15. Use only genuine SNAPPER replacement parts to assure that original standards are maintained. ventilation...

  • Page 5: Table Of Contents

    TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS... 2-4 TABLE OF CONTENTS...5 SECTION 1 - FAMILIARIZATION...6 Decals / Symbols ...7 SECTION 2 - OPERATING INSTRUCTIONS... 8-11 Pre-start Checklist ... 8-9 Rolling Machine w/o Engine Running ...8 Starting Engine ...9 Starting & Stopping Engine, Mower Blades ...10 Starting &...

  • Page 6: Section 1 - Familiarization

    Study these manuals before operating and keep both handy for future reference. For the nearest SNAPPER dealer in your area, check the yellow pages under the heading LAWN MOWERS. For engine parts and service, look for the engine manufacturer’s dealers under the...

  • Page 7: Decals / Symbols

    All operators should locate, read and understand all decals on the machine before attempting any operation of the machine. If any operator has difficulty in understanding certain symbols incorporated in the decals, an authorized SNAPPER dealer should be contacted for explanation. EUROPEAN NOISE...

  • Page 8: Section 2 - Operating Instructions

    Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check tires and add or release air as needed to bring pressure to 12 P.S.I. in front and 12 P.S.I. in rear tires.

  • Page 9: Starting Engine

    Section 2 - OPERATING INSTRUCTIONS IMPORTANT: This SCRAMBLER is equipped with hydrostatic drive. The forward, rearward and steering movement of the machine is controlled by a joystick lever. Joystick operations should be performed only from the operator’s position in the seat. A small movement of the joystick can cause the machine to move instantly.

  • Page 10: Starting & Stopping Engine, Mower Blades

    Refer to Section “Blade Brake Adjustment” or contact your SNAPPER dealer for assistance. 2.3.4. PARKING BRAKE 1. Manually position joystick in the neutral position. 2. Engage parking brake by pushing button at the top of lever and then pulling the parking brake lever slowly back to the “ON”...

  • Page 11: Cutting Height Adjustment

    Perform the following interlock system checks periodically during the operating season. Contact your authorized Snapper dealer if you have questions. DO NOT operate machine if any safety interlock or safety device is not in place and functioning properly.

  • Page 12: Section 3 - Maintenance Instructions

    3.1 INTRODUCTION To retain the quality of the SCRAMBLER, use genuine SNAPPER replacement parts only. SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number. 3.2 SERVICE - AFTER FIRST 5 HOURS...

  • Page 13: Check Mower Drive Belt

    Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT.

  • Page 14: Mower Blade Spindle - Lubrication

    Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT.

  • Page 15: Mower Deck Linkage - Lubrication

    Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT.

  • Page 16: Service - Annually

    If there is any problem: leakage, or malfunction, return the SCRAMBLER immediately to the nearest authorized Snapper dealer for service. 3.4.6. Fuel Filter Service fuel filter as instructed below. Close fuel valve in fuel line.

  • Page 17: Section 4 - Adjustments And Repair

    It is recommended that these adjustments be made by an authorized SNAPPER dealer. 4.1.1. NEUTRAL POSITION 1. Turn key to the ”OFF” position.

  • Page 18: Mower Deck & Component Adjustments

    However, if there is difficulty in achieving these adjustments and repairs, it is recommended that these repairs be made by an authorized SNAPPER dealer. 4.3.1. MOWER DRIVE BELT ADJUSTMENT The 33” mower deck drive belt does not require any adjustment.

  • Page 19: Blade Brake Adjustment

    Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage. 4.3.5. BLADE BRAKE ADJUSTMENT The SNAPPER SCRAMBLER is equipped with an electric clutch/brake that should stop blade rotation in 5 seconds or less after being turned off. If blades...

  • Page 20: Mower Deck Adjustment (Levelness) Side To Side

    Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT.

  • Page 21: Mower Deck Timing Rod

    If the timing rod requires adjustment, contact SNAPPER dealer for service. 4.3.10. WHEEL BRAKE ADJUSTMENT Adjust the wheel brake if wheels turn when parking brake is engaged. Adjust the wheel brake by turning wheel brake adjusting nut clockwise to increase braking action or counter clockwise to decrease braking action.

  • Page 22: Blade Replacement

    Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT.

  • Page 23: Battery Testing

    Section 4 - ADJUSTMENTS & REPAIR 4.5.5. BATTERY TESTING There are two types of battery tests: Unloaded and Loaded. The unloaded test is the procedure that will be discussed. It’s the simplest and most commonly used. An unloaded test is made on a battery without discharging current.

  • Page 24: Troubleshooting

    CORRECTIVE ACTION 1. Service battery. 2. Replace fuse. 3. Clean and check connections for good contact. 4. Contact authorized SNAPPER dealer. 5. Move blade engagement switch to “OFF”. 6. Engage park brake. 7. Contact authorized SNAPPER dealer. 8. Replace engine starter.
  • Page 25 5. Replace pulley. 1. Place joystick in desired speed position. 2. Move roll release lever to the engaged position. 3. Contact authorized SNAPPER dealer. 4. Move parking brake to disengaged position. 5. Replace traction drive belt. 1. Move blade switch to the “ON” position.

  • Page 26: Service Schedule

    & Page 13 Engine Manual Engine Manual Engine Manual Engine Manual Engine Manual & Page 13 Pages 22 Page 22 Pages 23 Page 8 Page 17-18 Pages 21-22 Page 14 Page 14 Pages 14-15 EYZ16335BVE 3-4168 3-5389 4-1823 2-9117 06175 EACH SEASON...

  • Page 27: Warranty

    For two (2) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both.

  • Page 28: Primary Maintenance

    PRIMARY MAINTENANCE...
  • Page 29 PRIMARY MAINTENANCE...
  • Page 30 PRIMARY MAINTENANCE...

  • Page 31: Primary Maintenance

    PRIMARY MAINTENANCE...
  • Page 32 Read, Understand, and Follow all warnings and instructions in this manual, the engine manual, and on the machine, engine and attachments. If you have any questions about your Snapper product, contact your local authorized Snapper dealer or contact Snapper Customer Service at Snapper, McDonough, GA.

Table of Contents