Jaud1: Front Audio Connector; Jbat1: Clear Cmos (Reset Bios) Jumper; Resetting Bios To Default Values - MSI MEG X399 CREATION Quick Start Manual

JAUD1: Front Audio Connector

This connector allows you to connect audio jacks on the front panel.

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumper to clear the CMOS memory.

Resetting BIOS to default values

1. Power off the computer and unplug the power cord
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and power on the computer.
1 MIC L
3 MIC R
5 Head Phone R
7 SENSE_SEND
9 Head Phone L
Keep Data
(default)
2 10
1 9
2 Ground
4 NC
6 MIC Detection
8 No Pin
10 Head Phone Detection
Clear CMOS/
Reset BIOS
Overview of Components
49