LED Drivers Introduction The TPS92410EVM-001 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS92410 direct drive linear controller designed for use with the TPS92411 in offline LED-drive applications. The TPS92410 is designed to control the drive of high-brightness light emitting diodes (LEDs) and features a wide input voltage range (9.5 V to 400 V), thermal foldback, analog dimming...
Description The TPS92410EVM-001 provides a high-brightness LED driver based on the TPS92410 in conjunction with the TPS92411 direct drive switch. It is designed to operate with an input voltage in the range of 90 VAC to 135 VAC with a 120 VAC nominal input voltage. This input voltage range is typical for offline applications.
Electrical Performance Specifications www.ti.com Electrical Performance Specifications Table 1 contains the electrical performance specifications for the EVM. Table 1. TPS92410EVM-001 Electrical Performance Specifications Parameter Test Conditions Units Input Characteristics Voltage range Maximum input current Output Characteristics Output voltage, V Upper LED stack...
Performance Data and Typical Characteristic Curves www.ti.com Performance Data and Typical Characteristic Curves Figure 2 through Figure 13 present typical performance curves for the TPS92410EVM-001. Power Factor 0.998 0.996 0.994 0.992 0.99 0.988 0.986 0.984 0.982 0.98 Input Voltage (VAC) C002 Figure 2.
Bill of Materials www.ti.com Bill of Materials Table 2 contains the TPS92410EVM-001 components list according to the schematic shown in Figure Table 2. TPS92410EVM-001 Bill of Materials Reference Designator Value Description Size Part Number 0.047µF CAP, Film, 0.047µF, 250VDC Radial...
Page 17
Bill of Materials www.ti.com Table 2. TPS92410EVM-001 Bill of Materials (continued) Reference Designator Value Description Size Part Number 220V Varistor, 220V, 600A Disc 10x7mm ERZ-V05D221 Panasonic U1, U2, U4 Switch Controlled Direct Drive Switch for Offline LED SOT23-5 TPS92411PDBV Texas Instruments...
Page 18
ADDITIONAL TERMS AND CONDITIONS, WARNINGS, RESTRICTIONS, AND DISCLAIMERS FOR EVALUATION MODULES Texas Instruments Incorporated (TI) markets, sells, and loans all evaluation boards, kits, and/or modules (EVMs) pursuant to, and user expressly acknowledges, represents, and agrees, and takes sole responsibility and risk with respect to, the following: 1.
Page 19
RADIO FREQUENCY REGULATORY COMPLIANCE INFORMATION FOR EVALUATION MODULES Texas Instruments Incorporated (TI) evaluation boards, kits, and/or modules (EVMs) and/or accompanying hardware that is marketed, sold, or loaned to users may or may not be subject to radio frequency regulations in specific countries.
Page 21
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.
Need help?
Do you have a question about the TPS92410EVM-001 and is the answer not in the manual?
Questions and answers