Snapper CP216019KWV, CRP216019KWV, CP215519HV Safety Instructions & Operator's Manual
21” steel deck walk mowers commercial models series 19
Hide thumbs
Also See for CP216019KWV, CRP216019KWV, CP215519HV:
- Safety instructions & operator's manual (32 pages) ,
- Parts manual (30 pages)
Table of Contents
Advertisement
Safety Instructions & Operator's Manual for
21" STEEL DECK
WALK MOWERS
COMMERCIAL MODELS
SERIES 19
Models
CRP216019KWV (7800200)
CP216019KWV (7800194)
CP215519HV (7800038)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to 'Engine Power Rating Information' for
further details.
Manual No. 7101586 (I.R. 9/13/2007)
TP 100-5291-IR-CW-N
Advertisement
Table of Contents
Related Manuals for Snapper CP216019KWV, CRP216019KWV, CP215519HV
Summary of Contents for Snapper CP216019KWV, CRP216019KWV, CP215519HV
- Page 1 Safety Instructions & Operator's Manual for 21” STEEL DECK WALK MOWERS COMMERCIAL MODELS SERIES 19 Models CRP216019KWV (7800200) CP216019KWV (7800194) CP215519HV (7800038) NOTE: Specifications are correct at time of printing and are subject to change without notice. * Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to ‘Engine Power Rating Information’ for further details.
- Page 2 Serial Number ______________________________________________________________ Engine Model_________________________Type__________________Trim___________________ It is very important that you register your purchase with Snapper to ensure warranty coverage. Please mail your product registration card to: Snapper at P.O. Box 777, McDonough, Georgia 30253. Or you may register online at www.snapper.com.
-
Page 3: Table Of Contents
Table of Contents Operator Safety ..........2 Important Operator Safety Instructions . -
Page 4: Operator Safety
If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967). Protection for Children Tragic accidents can occur if the operator is not alert to the presence of children. - Page 5 10. DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine. 11. Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.
-
Page 6: Features And Controls
Features and Controls IMPORTANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions. Features and Controls Oil Fill Cap and Dipstick Fuel Filler Cap... -
Page 7: Operation
Operation Pre-Start Check List Make the following checks and perform the service required before each start-up. 1. Check the guards, deflectors, grass bag, adapter, and covers to make sure all are in place and securely tightened. 2. Check the blade control (A, Figure 1), wheel drive control (B), and ground speed control (C) to insure they work freely. -
Page 8: Propelling Mower
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. www.snapper.com... -
Page 9: Cutting Height Adjustment
Operation (Continued) WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Cutting Height Adjustment 1. -
Page 10: Installing The Discharge Deflector
(C) to the bracket on the bag adapter. Lay the standoff between the bolt holes in the engine recoil and the bag adapter pulley bracket. (Position the standoff so that the bent end (D) is toward the engine recoil cover.) www.snapper.com... -
Page 11: Installing The Recycling Plug
Operation (Continued) WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Installing the Grass Bag Adapter (Continued) Flip the pulley over so that the bushing flange is... -
Page 12: Installing The Grass Bag
NOTE: An illustration of the Z-Fold is attached to the bag. Figure 15: Removing the bag slider WARNING Grass Catcher bags used on SNAPPER products are made of woven fabric, and are subject to deterioration and wear during normal usage. Check condition of bag before each use. -
Page 13: Maintenance
Maintenance Maintenance - Introduction To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number. -
Page 14: Check Mower Blade
7. Loosen the handle knobs. Carefully fold the handles forward, “flexing” the control cables to prevent cable damage. 8. Store the mower in a shed or other dry area, protected from weather. www.snapper.com... -
Page 15: Mower Blade Replacement
Maintenance (Continued) WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. -
Page 16: Wheel Drive Control Adjustment
The upper clip should be located 2” below the upper knob; the lower clip should be 4” above the lower knob. The cable should slide freely with the clips installed at these locations. www.snapper.com... -
Page 17: Driven And Drive Disc Service
Maintenance (Continued) WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Driven and Drive Disc Service If the mower does not propel itself properly, check for the following problems:... - Page 18 Install a new driven disc ring as follows: 1. Remove the pin and washer (C, Figure 28) from the transfer rod (D), and remove the end of the transfer rod from the hole in the driven disc assembly. www.snapper.com...
- Page 19 Maintenance (Continued) WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Driven Disc Ring Replacement (Continued) 2.
-
Page 20: Belt Service
25 hours of mower operation. Engine Drive Belt Replacement (Stretch Type Belts) 1. Empty the fuel tank. 2. Note the belt routing (Figure 35). There is no idler pulley on these models to disconnect. Figure 35: Engine drive belt routing www.snapper.com... -
Page 21: Transmission Belt Replacement
Maintenance (Continued) WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Engine Drive Belt Replacement (Stretch Type Belts - Continued) IMPORTANT: Drain the fuel tank before tipping the mower. -
Page 22: Service Schedule
Page 12 Engine Manual Engine Manual Engine Manual Engine Manual Page 12, 18 Page 13 Page 5 Page 11 Page 11 Page 14-17 EACH SEASON 7074138 7078026 7074141 7029344 7034604 7019795 7017168 7026691 7026407 7012354 7046784 7073528 7010927 7006156 7006155 www.snapper.com... -
Page 23: Troubleshooting
4. Replace belt. 1. Clean debris. 2. Clean or replace driven disc. 3. Replace drive belt. 4. Contact authorized SNAPPER dealer. 1. Adjust cutting height. 2. Move engine speed control to ‘Fast’ position. 3. Move ground speed control to a slower speed. -
Page 24: Warranty
For ninety (90) days from purchase date for the original purchaser’s commercial, rental, or other non-residential use, SNAP- PER, through any authorized SNAPPER dealer will replace, free of charge, any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both. - Page 26 Notes www.snapper.com...
- Page 27 Notes...
- Page 28 (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine. Snapper Products 535 Macon Street McDonough, GA 30253...