Makita HR2021 Technical Information page 18

W
iring diagram
Model HR2021, HR2022 without reverse switch,
with choke coil for radio interference suppression
Fix choke coil's lead wires (black
and blue) with lead holder as per
the illustration.
Fix field lead wire (black)
with lead holder as per
the illustration.
Fix brush holder's
lead wire (red) and field
lead wire (black) with lead holder.
* Pass brush holder's lead wire (red)
under the field lead wire (black).
* Do not slack brush holder's lead
wire (red) between brush holder and
lead holder.
Fix lead wires which are passed
through this area, with any of
these lead holders.
Fix field lead wire (black)
with lead holder as per
the illustration.
Fix noise suppressor's
lead wire (see-through)
with lead holder
as per the illustration.
Fix brush holder's
lead wire (black) and
brush holder's lead wire (red)
with lead holder as per
the illustration.
* Pass brush holder's lead wire (black)
under the brush holder lead wire (red).
* Do not slack brush holder's lead
wire (black) between brush holder and
lead holder.
Fix the following lead wires with this
lead holder.
* Choke coil's lead wire (blue)
* Field's lead wire (black)
* Noise suppressor's lead wire (see-through)
Pass lead wires inside of the rib.
Noise suppressor
P 18 / 18