Makita HR2021 Technical Information page 15

W
iring diagram
Model HR2020 with reverse switch,
without choke coil for radio interference suppression
Fix field lead wire (black)
with lead holder as per
the illustration.
Fix brush holder's
lead wire (red) and
field lead wire (white)
with lead holder as per
the illustration.
* Pass brush holder's lead wire (red)
under the field lead wire (white).
* Do not slack brush holder's lead
wire (red) between brush holder and
lead holder.
Fix brush holder's
lead wire (blue) and
field lead wire (black)
with lead holder as per
the illustration.
Fix lead wires which are passed
through this area, with any of
these lead holders.
Fix field lead wire (black)
with lead holder as per
the illustration.
Fix noise suppressor's
lead wire (see-through)
with lead holder
as per the illustration.
Fix brush holder's
lead wire (blue) and
field lead wire (black)
with lead holder as per
the illustration.
* Pass brush holder's lead wire (blue)
under the field lead wire (black).
* Do not slack brush holder's lead
wire (blue) between brush holder and
lead holder.
Fix the following lead wires with this
lead holder.
* Brush holder's lead wire (red)
* 2 field's lead wires (black)
* Noise suppressor's lead wire (see-through)
Pass lead wires inside of the rib.
Noise suppressor
Noise suppressor is not
used in some countries
P 15 / 18