Windows 98 Generic / Text Driver Settings - Samsung SRP-350 Integrator's Manual

Windows 98 Generic / Text Driver Settings

1. Select Start, then Settings, and then Printers.
2. From the printers dialog, right click the Generic / Text Only driver and choose
3. From the Generic / Text Only dialog box, click the Device Options tab:
Cash Drawer
Command
Auto Cut
Command
4. For the cash drawer command, in the Begin Print Job field:
5. For the auto cut command, in the End print Job field:
6. Click OK to save the new settings.
4 • Driver Installation Information
Properties.
Type: ESC (<ESC> will display)
Type: p (lower case)
Type: 0 (drawer 1) or 1 (drawer 2)
Type: 25 (on time)
Type: 125 (off time)
Press ALT and type: 0010 (line feed) :
Press ALT and type: 0010 (line feed) :
Press ALT and type: 0010 (line feed) :
Press ALT and type: 0010 (line feed) :
Press ALT and type: 0010 (line feed)
Press ALT and type: 0029 (GS) :
Press ALT and type: 0086 (V) :
Press ALT and type: 0001 (ASCII 01)
NOTE:
To enter these
commands, it may
be necessary to
activate the Num
Lock and use the
10-key pad on your
keyboard.
Samsung SRP-350 Setup & Service Information