Windows 98 Driver Settings - Samsung SRP-500 Integrator's Manual

Windows 98 Driver Settings

1. From your Windows desktop, select Start, then Settings, and then Printers.
2. From the printers dialog, right click the SRP-500 driver and choose Properties.
3. From the Generic / Text Only dialog box, click the Additional Commands tab:
4. At the BeginDoc field, type the command to print the logo, for example:
5. At the EndDoc1 field, type the command to print the logo, for example:
6. Make additional selections for drawer opening and paper cutting as necessary.
7. Click OK to save the new settings.
Samsung SRP-500 Setup & Service Information
Type command to print
a logo here.
Type command to print
promotion here.
Enter the number of
feed lines after print
Check to select if cash
drawer(s) to open.
Check to cut receipt
Without paper feeding?
\xlb\x67\x01
to print logo1. To print a logo, you must also download the bitmap image to flash
memory. See "SRP-500 StoreMaker Utility" on page 13.
\xlb\x67\x02
to print promotion2. To print a promotion , you must also download the bitmap image
to flash memory. See xxx
Driver Installation Information • 5