KIDSMILL UP! User Manual page 6

INSTALLATION
3
Step 3: Slide the seat(15) and the footrest(14) into
the grooves at the desired height. To mount the
safety bar between the legs, pull the legs outwardly.
5
Step 5: Screw(6) the extender wheels(7) under the rear legs
and the glider boots(8) at the bottom of the front legs. Not
too tight!
6. (8x) 7. (2x) 8. (2x)
4
Step 4: Place the seat(15) with the curved
corners against the legs.
6
9
5
10
2
3
Step 6: Place the chair on a flat surface and
tighten all screws in the correct order.
6
7
11
4
1