Table of Contents
Advertisement
STEP 18: Install bags onto cross assembly by
hooking slot in bag hanger onto tabs in channel
assembly.
STEP 19: Close cover and lock in place by hook-
ing lock knob into slot in cover latch arm.
STEP 20: Slip one hose clamp onto each end of
hose (use the clamp with the black quick-release
knob at the blower end), and install hose between
blower and bagger. Make sure to fit hoses firmly
onto adapters. Tighten clamps securely.
CLAMP
WITH
NUT
CLAMP
WITH
BLACK
KNOB
9
unit assembly
SLIP SLOT IN GRASS
BAG HANGER ONTO
TAB ON CROSS
ASSEMBLY
INSERT,
THEN MOVE
OVER AND
UP TO LOCK
3
Advertisement
Table of Contents
