VIETA VC-HD900BL User Manual page 41

* Ensure that you have set the right VIDEO settings of
the player.
BLACKAND WHITE PICTURE OR SCREEN ROLLING
* Ensure that you have set the right TV SYSTEM(e.g.
PAL, NTSC) setting.
FLAWS OF PICTURE OR SOUND
* Check whether the setting of AUDIO is right.
* Check whether the disc is scratched or stained.
* Check whether the AV connector and the output
terminal is stained.
* Check whether there is condensation inside the
Lens. If so, leave the player off for an hour
or so, then try again.
* Check whether the installation angle is less than 30
DISPLAY NO DISC OR BAD DISC
* Ensure that you have put the disc on the tray.
* Check whether the disc is put in the reverse side.
* Check whether the disc is distorted.
* Check whether the disc is stained or scratched
badly.
* Ensure that the disc format is compatible to the
player.
* Ensure that the temperature inside the car is not too
high. If so, cool off till the ambient
temperature returns to normal.
* Replace another disc to insert it into the disc
compartment.
REMOTE CONTROL IS INSENSITIVE OR DOES
NOTWORK
* Check the batteries of remote control and make
sure that they are to be powerful and
good conductivity.
* Direct the remote control to the IR sensor of the
player.
* Check whether there are some obstacles between
the remote control and IR sensor.
SOME FUNCTION BUTTONS DO NOT WORK
* Turn off the power, then turn on again.
* Reset the unit to zero, then turn on again.
* Remove the front panel from the unit, then install it
again and then turn on again.
THE RADIO DOES NOT WORK
* Check whether the antenna cable is connected
firmly. Or manually tune for a station.
THE TFT DISPLAY LOST TOUCH EFFECT
* Insert a disc and press stop button , then press
zoombutton, finally press the ^ andv buttons to
turn to calibrate mode and then tap the cross cursor
as it show until display ok and turn power off
and then turn the unit on again.
41