Playback In Random; Playback In Different View-Angle; Playback In Zoommode; Change The Caption Language - VIETA VC-HD900BL User Manual

4.13 Playback in Random

In the state of DVD/VCD(PBC OFF)/MP3/WMA/CD
playing, press the RDM button to switch between
RANDOM(ON)/RANDOMOFF. When in RANDOM(ON)
mode, it will play in random.

4.14 Playback in Different View-Angle

1. In the state of VCD/MP3/WMA/CD playing, the
VIEW-ANGLE button on the IR remote control is not
available.
2. In the state of DVD playing, press the VIEW-ANGLE
button repeatedly on the IR remote control to view
in different angle.(This function is only for the DVD
media with ANGLE function)

4.15 Playback in ZoomMode

In video/image mode, during playback, press the
ZOOMbutton continuously to enlarge a certain area
of the images on the screen with these multiples:
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,Z
OOMx1/4,ZOOMOFF.
Press one of the ^/v/>/< buttons to select the area
you want to enlarge.

4.16 Change the Caption Language

In the state of DVD playing, press the SUBTITLE
button repeatedly to select the language of the
caption or turn off the caption.(depend on the media
used.)
In the state of VCD/MP3/WMA/CD playing, the button
is not available.

4.17 Change the Audio Language

1. In the state of DVD playing, press the AUDIO
button repeatedly on the IR remote control to select
the desired language type. (depend on the media
used)
2. In the state of VCD playing, press the AUDIO
button repeatedly to select the sound mode of the
MONO L, MONO R, MIX MONO and Stereo, no
language function.
3. In the state of CD/WMA/MP3 playing, the AUDIO
button is invalid.

4.18 Look over the Playback Status

1. In the state of DVD playing, press the OSD button
repeatedly on the remote control to turn on/off the
playback status. When it is on, it will display the
information such as: the serial number of the playing
title, the serial number of the playing chapter, the
elapsed time of the playing chapter, the remained
time of the playing chapter, the elapsed the remained
time of the playing title, etc.
2. In the state of VCD/CD playing, press the OSD
button repeatedly on the remote control to turn on/off
the playback status.
When it is on, it will display the information such as:
the serial number of the playing track, the elapsed
time of the playing track, the remained time of the
playing track, the elapsted time of the disc, the
remained time of the disc.
3. In the state of MP3/WMA playing, press the OSD
button repeatedly on the remote control to turn on/
off the playback status. When it is on, it will display
the information such as: the serial number of the
playing track, the elapsed time of the playing track,
the remained time of the playing track.

4.19 ProgramPlayback

It allows you to enter the order in which you want
some chapters/tracks in DVD/VCD/MP3/WMA/CD to
play.
1. During playback, press the PROG button to enter a
programinterface as follows:
2. Use the direction buttons to move cursor onto the
desired place for inputting the sequence number.
3. Use the number button to input desired sequence
number of title/chapter/track with desired sequence.
4. Use the direction button to move cursor onto
Play item, then press the OK button to play the
programmed titles/chapters/tracks in programmed
order; only pressing the PLAY button also can
play the programmed titles/chapters /tracks in
programmed order.
* To exit programplayback, firstly press the STOP
button, then press the PLAY button to enter sequence
playback; or press the PROG button twice again.
* To remove the all programmed sequence numbers,
move the cursor onto Clear item, then press the OK
button.
* To change the programmed sequence, move the
cursor onto the itemyou want to change, input the
desired sequence number.
* During VCD playback, if it is in PBC ON mode,
at the same time of entering the state of program
playback, it turns off PBC mode.
35