Common Operation; Radio Operation - VIETA VC-HD900BL User Manual

2. Common Operation

1. To turn on/off the unit
In power off mode, short press the POWER button to
turn on the unit.
In power on mode, long press the POWER button on
the front panel or short press the POWER button on
the remote control to turn off the unit.
2. To slide the monitor of the Car Audio Systemout of/
into the chassis
Pressing the OPEN button can slide the monitor of
the Car Audio System out of the chassis or slide it
into the chassis.
3. To select an optimal angle of the monitor of the Car
Audio System
To select an up-down optimal angle of the monitor
of the Car Audio System, press the DOWN/UPbutton
on the monitor or ANG button on the remote control
repeatedly.
Press the MODE button to select RADIO, DISC (After
inserting a disc), USB(After inserting a USB storage),
CARD(After inserting a card), AUX or BLUETOOTH
mode.
During playback, tapping the
up Keyboard interface can pop up Mode Menu as
right. then tap one icon in it to select your desired
mode.
To adjust sound level
Rotate the VOL knob on the front panel or press
or hold the + or - button on the remote control to
directly adjust the volume level.
6. To mute sound
Press the MUTE button on the remote control to turn
on/off MUTE mode. pressing the POWER button on
the front panel shortly also can turn on/off MUTE
mode.
7. To display clock time
Press the CLK button to display clock time on the
small monitor of the front panel.
After sliding the monitor into the chassis, pressing
the CLK button can displayclock time on the small
LCD.
30
icon after popping
8. To select a desired EQ mode
Press the EQ button on the remote control to select
one of the preset music equalizer curves: POP,
ROCK, CLAS, OFF. The sound effect will be changed.
9. To turn on/off LOUD mode
Press the LOUD button to turn on/off LOUD mode.
When turning on LOUD mode, it will enhance bass
level immediately when bass is not enough.
10. To remove the front panel and reset the player
When the monitor or the small LCD display wrongly
or some buttons are not available or sound is
distorted, press the REL button on the front panel
to detach the front panel and then pull it rightward
and then leftward to remove it, then press the RESET
button to rehabilitate the distorted programto zero.
11. To do setup
To do setup, tap the
turn to SETUP interface as right.
In the interface, select one of GENERAL, TIME,
AUDIO, VIDEO ,RADIO , CALIBRATE by tapping
them, then set themby tapping some icons on the
right side accordingly.

3. Radio Operation

1. Enter RADIO mode
When you use MODE button or Mode Menu to enter
RADIO mode, it will display RADIO interface as right.
In RADIO interface, tapping the
Mode Menu; during playback ,press and hold the
mode button can turn on or off TFT display; tapping
the icon can turn to frequency interface as
icon in the Main Menu to
icon can enter
RADIO DVD 7"