Table of Contents
Advertisement
1.4.5.5 ANT. / RF IN
Follow the picture and plug a TV Aerial to
the ANT. / RF IN socket;
1.4.5.6 ANT. / RF OUT
1. Make sure the player is connecting to
power supply;
2. Make sure a TV Aerial is connecting to
the ANT. / RF IN socket;
3. Follow the picture and plug a TV cable
to the ANT. / RF OUT socket then plug
the cable to a TV or other TV receiver.
The player can loop out the DVB-T signal
to other TV receiver device. In this way,
you can watch the TV programs with an-
other TV receiver while recording.
1.4.6 Connecting to an Digital Amplifi er
1. Follow the picture and plug in the RCA
connector on your coaxial cable to the
player's S/PDIF Coaxial jack.
Or if you use optical fi ber, please plug in
the Toslink connector on your optical fi ber
to the player's S/PDIF Optical jack;
2. Follow the picture and plug in the other
connector on your coaxial cable or
optical fi ber to the digital audio device
(digital amplifi er or decoder).
Note: Optical fi ber and coaxial cable are
not supplied.
In this way, you can enjoy powerful Dolby
Digital, DTS, or MPEG sound. (Please
refer to '3.2 Changing Audio Settings' for
confi guration)
• MediaStation 6
9
Advertisement
Table of Contents
