Table of Contents
Advertisement
Attention: The MS 6 itself can no longer
be controlled since now only the internal
hard-drive serves as a cache for the PC/
MAC!
4. This way, you can access the contents
of the MS6 hard-drive and use the hard-
drive in the same manner as a standard
external hard-drive.
5. For normal operation of the MS 6, the
hard-drive must be disconnected from
the PC/MAC as follows:
a) MAC: Right click on "Partition 1" and
then click "Eject partition".
b) PC: As with a normal USB device,
execute the command "Safely remove
hardware and eject medium" by se-
lecting the USB icon on the bar at the
bottom.
6. Then remove the USB cable. The MS 6
will then restart and can be operated
normally!
1.4.3 Connecting a USB Device
1. Make sure the player is powered on;
2. Plug in the USB stick or USB HDD etc.
to the USB HOST port of this player.
In this way, you can browse contents on
the USB device.
1.4.4 Connecting a Memory Card
Memory card can be used by inserting to
the card slot
1. Follow the picture to insert the memory
card to the card slot properly;
2. Insert the card by following the arrow
pointer in the picture.
In this way, you can browse contents on
the memory card.
• MediaStation 6
7
Advertisement
Table of Contents
