Alpine TDA-7567R Owner's Manual page 36

1
SOURCE
2
3
TUNE
A. ME
4
DN
36
90.10
A. S. U.
TAPE
F 1
F 2
BAND
PROG
F3
MW
LW
F1
UP
Radio Operation
Manual Tuning
Press the SOURCE button until a radio
frequency appears in the display.
Press the BAND button repeatedly until the
desired radio band is displayed.
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappears from the
DX SEEK
display.
Note: The initial mode is DX SEEK.
SEEK
(OFF)
Press the DN or UP button to move downward
or upward one step respectively until the
desired station frequency is displayed.
Note: The ST indicator appears on the display
90.10
when a Stereo FM station is tuned in. If
the stereo FM signal becomes weak, the
ST indicator disappears and the unit
automatically switches the mode from
stereo to monaural to reduce the noise.
When the signal becomes strong
enough, the unit automatically switches
back to the stereo mode.
English