Pro-Picture Menu - BenQ Commuter CP220 User Manual

2. Pro-Picture menu

Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
Auto Resize
(On)
Aspect Ratio
(4:3)
H Position
(0)
V Position
(0)
Phase
(depends on the
selected input
source)
H Size
(0)
Sharpness
(15)
34 Operation
DESCRIPTION
Automatically resizes the input signal pixel resolution to the native
resolution of the projector.
On: The pixel resolution of the input signal is converted to the native
resolution of the projector (1024 x 768). For input signals with lower
resolutions, gaps in the pixels are automatically interpolated into the
image before being projected. This may distort the image clarity.
Off: The image is projected as its original resolution, with no pixel
conversion. For input signals with lower resolutions, the projected image
will display smaller than if resized to full screen. You could adjust the
zoom setting or move the projector towards the screen to increase the
image size if necessary. You may also need to refocus the projector after
making these adjustments.
There are two aspect ratio settings.
1. 4:3 (for a standard screen)
16:9 aspect ratio is only sourced through the Component Video input
when being fed an appropriate 16:9 aspect signal. See
Component Video source device" on page 18
preferred projected image size" on page 12
Adjusts the horizontal position
of the projected image.
Adjusts the vertical position of
the projected image.
This function allows you to adjust the clock phase
to reduce image distortion.
Adjusts the horizontal width of the image.
Adjusts the image to make it look sharper or softer.
2. 16:9 (for a wide screen)
and
for details.
-30
-30
"Connecting a
"Obtaining a
+30
+30