Door Lock Time; Alarm - KB VISION KX-DR01 User Manual

Card
Password
Fingerprint
Card/Fwd/FP
Card+Pwd
Card+FP

4.3.4 Door Lock Time

Door lock time setup includes hold time and over time setup.
Step 1. In A&C setup, press【↑】 key or 【↓】key, select door lock time setup and press
【√】key.
Step 2. Press【←】key to delete original data, input hold time and over time, press 【√】
key.
Hold Time：
Over Time：
System prompt setup is successful.
Door lock hold time is the time door remains open after user swipe card. If the door
remains open exceeding "over time", it will send alarm.

4.3.5 Alarm

User can enable or disable alarm, system alarm includes intrusion, anti-pass back, duress
card, door sensor and door timed out. Please refer to Chart 4- 3.
Alarm Type
Intrusion
Anti-pass back
Duress Card
Door Sensor
Unlock Mode Setup
Door Lock Time Setup
2000
60
Note
Enter without valid card swiping or password, it will
generate an alarm.
Must swipe card when enter/exit, otherwise it will
generate an alarm.
Enter with duress card, it will generate an alarm.
When A&C device is damaged, it will generate an
alarm.
○
√
MS
S
13