Add User - KB VISION KX-DR01 User Manual

Card Type
Black list
Duress card
Note:
All of these cards will be sent to center, management platform will process according to
card type.
Password user represents user who input password in setup to enter.
Note:

Card user has not set password, and you shall set unlock mode to card, card or
password or fingerprint in order to enter.
 Card user set card password, and you shall set unlock mode to card, card +
password, card or password or fingerprint in order to enter.

Card user set fingerprint, but before entering, user shall set unlock mode to card, card
+ password, card or password or fingerprint.

User, who set period, can only unlock door within designated period.

Password user, shall set unlock mode to password, card or password or fingerprint in
order to enter.

4.2.1 Add User

To add user:
Step 1. In homepage, press 【↑】or【↓】 key to select user management, press 【√】
key.
Step 2. Press 【↑】or【↓】 key to move up or down, select add user and press【√】key.
Note
cannot unlock.
When you add card, system will ask if set card
password, period and term of validity.
When you swipe card on black list and enters, it wanrns
service personal.
When you add card, system will ask if set card
password, period and term of validity.
Duress card becomes valid after you set duress alarm.
You can swipe this card to unlock, but an alarm will be
send to center.
Chart 4- 1
6