Tripod Data Systems Nomad Manual page 5

3. Install the screen protector
To keep the touchscreen clean and protected, install the screen
protector following the instructions provided on the screen
protector package. Unprotected screens become scratched and
scuffed over time. Screen protectors extend the life of the display
by providing a protective and replaceable barrier between abrasive
grit and the surface of the display.
Screen damage associated with failure to use a screen protector is
not covered under warranty,
4. Attach the hand strap
Attach the hand strap to the back case.
5. Turning your unit on and off
The unit will boot up when the battery is installed. If not, press
and release the green Power key on the keypad. To turn your unit
off, press and release the Power key again.
One of the most convenient features of your unit is "instant on"
and "instant off" (also known as "suspend/resume"). There is no
waiting for the unit to boot up every time it is turned on. "Instant
on" does not occur on the first boot-up.
When the unit first turns on, the message "Tap the screen to set up
your Windows Mobile-based device" will appear.
6. Align screen
The Align Screen message will display a series of targets to tap in
sequence on the screen. Use the stylus to tap the targets firmly and
accurately. Sometimes you need to repeat the alignment procedure
more than once to provide a satisfactory alignment.
7. Location – time zone
Select your time zone location, set the time and date to the correct
values and tap Next.
8. Password – lock (optional)
You do not have to provide a password unless you are concerned
about unauthorized use. To eliminate using a password, tap Skip.
5