Caring For Your Unit - Tripod Data Systems Nomad Manual

Caring for your Unit

Cleaning the unit
Clean the unit with a soft cloth dampened with either water or a
diluted mild detergent. If a mild detergent is used, rinse with
water to ensure all residue is removed. Do not use any
chemical cleaners and do not put the unit in the dishwasher.
Care of the touchscreen
Use only the included stylus or other devices specifically designed
for use with touchscreens. Ensure that you DO NOT use the metal
screwdriver end of the stylus on the touchscreen or it will scratch
your screen. Only use the smooth end of the
The use of ballpoint pens, nails or other sharp objects to operate
the touchscreen will scratch and/or damage the unit. Keep the
touchscreen clean by gently wiping the display, using a soft cloth
dampened either with clean water or glass cleaner. Do not use
abrasive cleaners or apply any cleaner directly to the display.
Doing so will void your warranty.
Use the screen protectors included with the unit to keep the
touchscreen clean and protected, following the instructions
provided on the screen protector package.
Case vent hole
A GoreTex membrane is used at the vent
hole to equalize the atmospheric pressure
within the unit and to prevent dust, water,
etc. from entering. The vent must remain clear of any obstruction.
Damage to the touchscreen will occur if the vent is covered.
Covering the vent with stickers and labels may void the warranty.
Mechanical shock
The unit is designed to resist damage for drops up to 1.22 meters
(4.0 ft). However, you should protect the display from impact,
pressure, or abrasive substances that can scratch it or crack it. The
unit should not be dropped unnecessarily
stylus.
Vent
hole
.
27