Settings On Your Unit - Tripod Data Systems Nomad Manual

Status indicators
Following are some of the status indicators seen on your unit.
Icon Description
Battery power is low
Battery power is very low
Battery charging
Battery level
Battery calibration in progress
Instant messages received
Speaker is on
Speaker is off (or in mute
position)

Settings on your Unit

Tap Start / Settings. Tap any of the icons on the Personal,
System or Connections tabs to customize the unit settings to your
own preferences. Tap OK to exit the settings. Some of the more
useful settings are described below.
Lock (password)
If you want password protection from unauthorized use of your
unit, tap Personal / Lock. The password must be entered every
time you turn the unit on or resume operation.
WARNING: BE CERTAIN TO REMEMBER THE
PASSWORD. The only way to recover from a forgotten password
is to perform a Clean Boot and you will LOSE all application
software, licenses, settings and data on your unit. See page 12
about how to perform a Clean Boot.
Icon Description
Indicates that one or more
networks are present. Tap to
access an available network
Wireless LAN connected
Active connection, but not
currently synchronizing
Inactive connection to
computer or wireless network
Synchronizing
Synchronizing error
E-mail has been received
Pending alarm
15