Tripod Data Systems Nomad Manual page 22

Bluetooth file transfer between two units
Confirm Bluetooth is enabled on both units, the receiving unit is
visible and within close range. Tap Add new device to pair with
the other unit.
Tap Start / Programs / File Explorer
on the unit that will send the file. Browse
to the file to be sent, and touch and hold
on it. Tap Beam File. Wait for several
moments while the sending unit searches
for Bluetooth devices in the vicinity.
Select the receiving unit from the list, and tap Tap to send. Wait a
few moments while the file is transferred. The receiving unit will
open a window saying you are receiving data and if you want to
stop receiving, tap Cancel. The file will be saved in the My
Documents folder.
Bluetooth connection with a PC
Ensure that your PC has connectivity software installed. See
Connecting to the PC on page 19. Ensure that Bluetooth on the PC
is enabled and configured to be discoverable. Refer to your PC
documentation for instructions.
Confirm that Bluetooth is enabled on your unit. Under Bluetooth
Settings, the Devices tab, tap Add new device... Wait a few
moments while your unit searches for Bluetooth devices in the
vicinity. Select the PC from the list and tap Next. For enhanced
security, use passcodes. On your unit, confirm that the ActiveSync
service is available and check in the check box and tap Finish.
Tap Start / Programs / ActiveSync / Menu / Connect via
Bluetooth.
Bluetooth connection with a printer
NOTE: Windows Mobile 6 does not support printing without
additional third-party software.
22