Temperature Regulation; Coolmatic Function; Quick Chill Function - AEG S72388SK1 User Manual

Table of Contents

Advertisement

Available languages

Available languages

6
Control panel

Temperature regulation

To operate the appliance, proceed as follows:
1. Set the required temperature by pressing the corresponding temperature regulator. The
temperature indicator will immediately show the changed setting (DESIRED tempera-
ture) and the temperature indicator flashes.
2. Each time the temperature regulator is pressed the DESIRED temperature is adjusted
by 1 °C. The DESIRED temperature must be reached within 24 hours.
3. Once the required temperature has been set, after a short period (approx. 5 sec.) the
temperature indicator will show again the current ACTUAL temperature inside the cor-
responding compartment. The temperature indicator will change from flashing to con-
tinuous illumination.
For a correct storage of the food the following temperature should be set:
• +5 °C in the fridge
When the setting is changed, the compressor does not start immediately if automatic
defrosting is currently taking place. As the storage temperature within the fridge is reached
quickly you can store food immediately after switching on.

COOLMATIC function

The maximum performance is obtained by setting the COOLMATIC function. It's recom-
mended when loading large quantities of food.
1. Press the COOLMATIC button.
2. The COOLMATIC light will light up.
The internal temperature goes down to +2°C.
After about 6 hours the COOLMATIC function switches off automatically.
It is possible to deactivate the function at any time by pressing the COOLMATIC button.

Quick Chill function

The Quick Chill function provide rapid cooling of
cans and bottles through cold airstream.
1. Put the cans/bottles on the Quick Chill bottle
holder.
2. Open the air lever (1) towards maximum.
3. Activate COOLMATIC function.
4. The Quick Chill function stops automatically
after approximately 6 hours.
5. When the cooling is finished return the air
lever (1) towards minimum.
To cancel the function at any time, press COOL-
MATIC button.
The Quick Chill bottle holder can be removed if not
used.
1

Advertisement

Table of Contents
loading

Table of Contents