Closing The Door; Technical Data; Installation; Positioning - AEG S72388SK1 User Manual

2. Press the spring and at the same time pull
the cover downwards.
3. Replace the bulb (E14 socket) with one of
the same power (the maximum power is
shown on the light diffuser).
4. Reconnect the appliance.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.

Technical data

Dimension
The technical information are situated in the rating plate on the internal left side of the
appliance and in the energy label.

Installation

WARNING!
Read the "Safety Information" carefully for your safety and correct operation of the ap-
pliance before installing the appliance.
The final assembly of the appliances must be carried out by Service Center.

Positioning

Install this appliance at a location where the ambient temperature corresponds to the
climate class indicated on the rating plate of the appliance:
Height
Width
Depth
Technical data
1800 mm
595 mm
600 mm
15