Table of Contents
Advertisement
1. Remove the screws. (When you first remove the product from
its packaging, the screws will already be loose.)
2. Once loose, pull the two sections apart, or to remove the base,
insert a blunt instrument into the groove.
3. Insert 2 AAA batteries (included), ensuring proper +/–
polarities are observed.
4. To close, line up the dot with the groove. The screw holes are
now lined up.
5. Tighten the screws. Ensure the unit is firmly closed to keep
it watertight.
Notes:
•
appears when the batteries are running low.
• To save power, the unit automatically turns off after 30 minutes.
To turn the unit on and off, press and hold the
two seconds.
OQ005 IM_v1 1105-PB 0216.indd 9
Batteries
Power On/Off
9
button for
2/17/06 1:52:00 PM
Advertisement
Table of Contents
