Sharper Image Baby Bath OQ005 Instructions Manual page 12

Notes:
• To display the user-defined water temperature, press MEMORY.
• The unit defines the temperature + or – 3.6°F (+ or – 2°C)
of the temperature stored. For example, if the temperature re-
corded is 80.6°F (27°C), any reading below 77°F (25°C)
appears on the LCD as Cold and any reading above 84.2°F
(29°C) appears on the LCD as Hot.
• The user-defined temperature range can only be set if the water
temperature is between 32°F and 98.6°F (0°C and 37°C). There-
fore, if the recorded temperature is 96.8°F (36°C) (the comfort
temperature range is from 93.2°F to 98.6°F (34°C to 37°C). The
unit will show "- -" if the water temperature goes above 98.6°F
(37°C).
• MEMORY always appears on the LCD if the user-defined tem-
perature range is set. To change the setting again, press and hold
MEMORY. To clear the memory, press RESET.
OQ005 IM_v1 1105-PB 0216.indd 12
Basic Functions
12
2/17/06 1:52:01 PM