Table of Contents
Advertisement
To turn either unit on or off, press and hold
1. Insert batteries and plug in adapters.
2. Turn the "Baby" unit on, then turn on the "Parent" unit.
3. Place the two units close to each other for five seconds.
This allows the units to "recognize" each other.
4. Position the units no more than 980 feet (300 meters) from
each other.
For best results:
• Keep the units away from electrical or mechanical objects,
direct sunlight or moisture.
• Do not exceed the 980-foot (300-meter) transmission range
between the two units.
• Minimize obstructions, such as doors, walls and furniture as
those obstructions decrease the transmission range between
the two units.
In order to obtain optimal reception, you may need to experi-
ment with various locations.
OQ005 IM_v1 1105-PB 0216.indd 25
Power On/Off
Setup
25
.
2/17/06 1:52:12 PM
Advertisement
Table of Contents
