Section 1 - Familiarization - Snapper 281023BVE, 281123BV, 281123BVE, 281123HVE, 281323BVE, 301123BV, 301123BVE, 301323BVE,331323HVE, 331523KVE, 331523BVE, W280923B, Operator's Manual

Section 1 - FAMILIARIZATION

FUEL TANK
TRANSMISSION
SHIFT LEVER
OVERRIDE
CONTROL
DISCHARGE
DEFLECTOR
1.1 INTRODUCTION
This manual has been prepared for the operator's of the
SNAPPER Rear Engine Rider. Its purpose, aside from
recommending standard operating procedures and
routine service requirements, is to promote SAFETY
through the use of accepted operating practices. Read,
Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Pages 2 & 3 of this manual and All
SAFETY messages on the Rear Engine Rider and its
attachments before operating.
BLADE LEVER
FIGURE 1.1
STEERING
WHEEL
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows the
essential parts of the SNAPPER Rear Engine Rider. It is
recommended that all operators of this equipment
become thoroughly
components, and operation of this machine before
operating. Specific details involving the engine are found
in the separate engine owner's manual.
manuals before operating and keep both handy for future
reference.
5
ENGINE SPEED
CONTROL
IGNITION
SWITCH
CLUTCH/BRAKE
PEDAL
PARK BRAKE
LATCH
BLADE
familiar with the controls,
Study these