Table of Contents
Advertisement
ePAQ-9150
____________________________________________________________________________
Introduction
Scope of the Manual
This book is intended to be self-contained. Few pre-requisites are required. Readers
should be familiar with SUPERVISORY CONTROL AND DATA AQUISITION
(SCADA) systems and their terminology.
The book is divided into three (3) sections. The first section is a general overall
description of QEI's ePAQ-9150 Remote Terminal Unit Subsystems. The second
section contains User's Guides for each of the standard panel assemblies used to
configure "standard" type of Remote Terminal Units (RTUs). The third section
contains a Glossary of Terms used in this manual.
In addition to this, a fourth section (APPENDIX A) may be added to the manual for
some systems. If added, this section will contain information for "special" optional
equipment that may be included on those systems.
Other Related Documentation
The following additional manuals contain information to assist the user in the
installation and servicing of the ePAQ-9150 as part of a SCADA system.
Document No.
UM-2012
UM-2013
Various
TP-803
TS-820-2
Copyright © 2016 QEI
Description
ConfigWiz User's Guide
ePAQ/6CPP6 Configuration & Testing Guide
ConfigWiz Addendum(s)
6CPP6 Test Panel Software Instruction Manual
6TS4 QUICS Master/Remote Test Simulator UG
Remote Terminal Unit
Introduction
1
Advertisement
Table of Contents
