Advertisement
E. Install urinal
(See Fig.5)
Lift up the urinal, level the installing hole with the hole on installing. The urinal on the hook secure.
F. Install beehive strainer
Ascertain the position for beehive strainer as shown. Fix the beehive strainer by tightening screw
CONSUMER RESPONSIBILITIES
1. Urinal is designed for use with potable water. Avoid water that includes a lot of contaminants or with acid/alkali water
and impure water.
2. If you live in a hard water area, make certain that the holed in the toilet rim are kept clean to ensure proper bowl flushing, Toilet bowl
cleaners should be used at least once a week. Use a long-handled brush to clean the rim holes, and to clean as far into the trap as
possible to prevent mineral deposits from forming.
3. Most toilet bowl cleaners are not harmful to the surface of the urinal, please follow the bowl cleaner manufacturer's instructions carefully.
4. Do not use abrasive cleaners for china surface.
5. Do not directly flush the wire connector of sensor with water.
6. Do not make Sensor Window near strong ultraviolet and electromagnetism.
7. Keep the sensor window clean. Do not attack the sensor. The sensor cover can be cleaned by the soft rag. (with neutral liquid detergent).
Do not use the eradicator, abrasive powder or the oil, acid or alkali liquid detergent. Do not sprit the air freshener, disinfectant or the other
kinds of odious smell remove, clean organic liquid to the sensor directly.
1063245-T01-B
-3-
Fig.5
.
Fig.6
Advertisement
