AEG FAVORIT 55010 User Manual page 9

Programme buttons
Press one of these buttons to set a washing programme. The related indicator comes on.
Refer to 'Washing programmes'.
Delay start button
Use this button to delay the start of the washing programme with an interval between 1
and 19 hours. Refer to 'Select and start a washing programme'.
Display
The display shows:
• The electronic adjustment of the level of the water softener.
• Activation/deactivation of the rinse aid dispenser (only with multitab function on).
• The washing programme duration.
• Remaining time to the end of the washing programme.
• The end of a washing programme. The display shows a zero.
• Remaining time to the end of the delay start.
• Fault codes.
Function buttons
Use the function buttons for these operations:
• To adjust electronically the level of the water softener. Refer to 'Setting the water soft-
ener'.
• To activate/deactivate the multitab function. Refer to 'Multitab function'.
• To activate/deactivate the rinse aid dispenser when the multitab function is on. Refer to
'What to do if...'.
• To cancel the washing programme in progress or a delay start in progress. Refer to 'Se-
lect and start a washing programme'.
Setting mode
The appliance must be in setting mode for these operations:
• To select and start a washing programme and/or a delay start.
• To adjust electronically the level of the water softener.
• To activate/deactivate the multitab function.
• To activate/deactivate the rinse aid dispenser.
Press the on/off button. The appliance is in setting mode when:
– All the programme indicator lights come on.
Press the on/off button. The appliance is not in setting mode when:
– Only one programme indicator light comes on.
– The display shows the duration of a washing programme or a delay start.
– It is necessary to cancel the programme or the delay start to go back to the setting
mode. Refer to 'Select and start a washing programme'.
9
Control panel