Care And Cleaning - AEG FAVORIT 55010 User Manual

How to cancel a washing programme or a delay start
If a washing programme or a delay start has not started, you can change the selection.
When a washing programme or a delay start are in progress, it is not possible to change the
selection. It is necessary to cancel the washing programme or the delay start to make a new
selection.
When you cancel the delay start, this automatically cancels the selected washing pro-
gramme. You have to select the washing programme again.
1. Press and hold the function buttons B and C until all the programme lights come on
2. Make sure that there is detergent in the detergent dispenser before you start a new
washing programme.
At the end of the washing programme
• The appliance stops automatically.
• The display shows 0.
• The programme-in-progress indicator light stays on.
1. Switch off the appliance.
2. Open the appliance door.
3. For better drying results, keep the door ajar for some minutes.
• If you do not switch off the appliance, after three minutes from the end of the washing
programme:
– all indicator lights go off,
– the display shows one horizontal bar,
This helps to decrease energy consumption.
Press one of the buttons (not the on/off button), the display and the indicator lights come
on again.
Remove the items from the baskets
• Let the dishes become cold before you remove them from the appliance. Hot dishes can
be easily damaged.
• First remove the items from the lower basket, then from the upper basket.
• There can be water on the sides and on the door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.

CARE AND CLEANING

To remove and clean the filters
Dirty filters decrease the washing results. Make a check at intervals and if necessary, clean
them.
The appliance has three filters:
• Coarse filter (A)
• Microfilter (B)
Care and cleaning
19