COLLABORATE LIVE 300 COMPONENTS INCLUDED COLLABORATE Live 300 COLLABORATE Live 300 codec with power supply, VESA Mounting Plate, and COLLABORATE Remote Control with USB dongle 910-2100-004 UNITE 150 PTZ camera, power supply, USB cable Note: The remote control inside the camera box...
QUICK-START GUIDE CONNECTING PERIPHERALS Connect the CHAT 150C, UNITE Camera, monitor(s), and network to the COLLABORATE Live 300 codec as shown. DC In HDMI 1080P or 720P USB Port for Video/Audio Out (for UNITE Camera Primary Monitor) Mini Display Port (for 2nd...
Page 4
COLLABORATE LIVE 300 Remote control dongle only 7.1 digital L+R audio output jack SECURITY A lock support feature allows you to secure your codec. SD Card Slot Lock Support (Do Not Use)
QUICK-START GUIDE CONFIGURING DISPLAY SETTINGS After all peripherals are connected to the unit, turn the unit on. Once COLLABORATE Live is loaded, the Setup Wizard appears. The Setup Wizard lets you configure the system name, time, and network, proxy, and COLLABORATE Space settings. After the Setup Wizard is complete, using the remote control, navigate to the display settings: Settings >...
COLLABORATE LIVE 300 CONFIGURING AUDIO SETTINGS The COLLABORATE Live 300 audio input and output are set to the CHAT 150C. Verify this in COLLABORATE Settings > Audio & Video...
CONFIGURING NETWORK SETTINGS Using your remote control, navigate into the network settings: Settings > Advanced > Network The COLLABORATE Live 300 obtains its IP automatically by default from a DHCP server. Set “Obtain Address From DHCP” to “Disabled” to manually configure...
Need help?
Do you have a question about the COLLABORATE Live 300 and is the answer not in the manual?
Questions and answers