Table of Contents
Advertisement
4.3.8
Quick Dial
The quick dial-up can be set up in the mobile phone. Use the number key of 2~9 to show different phone
number. When using, press some certain number of 2~9 under the waiting screen for long time to call the
corresponding number. If the number key is not set up with phone number, the mobile phone will prompt that
the phone number is blank.
When setting up the quick dial-up, press the number key under the waiting screen without setting up the
quick dial-up for long time; also set up a quick dial-up number of call setup to enter.
After entering the setup interface of quick dial-up, there will be different operating prompts according to
different situations that you do select the number key to set up the quick dial-up or not. If the number key is
set up with quick dial-up, there will be a prompt with set phone numbers or linkmen at the left lower screen
corner of mobile phone. If not set up, there will be some prompts being not bound at the left lower screen
corner.
Select Delete to delete the existed number and reset up the new number.
When setting up new number, get the desire one through inputting numbers manually or browsing the phone
book. Put it into the desired number key of quick dial-up so as to use conveniently. If the number is finished
to select, the mobile phone will adjust automatically that the selected number is the existed one or not in it. If
strange, it only shows the number to give you the correct prompt as possible.
If there are quick dial-ups, the icon of number key is the one with√. If not, it will be a normal one of
number key.
4.3.9
IP Code
Setting up IP code: input the IP code to use. If not setting up, it is same as the effect of directly dialing up.
4.4
Security
The setup of safety includes the following contents such as changing password, starting up PIN code, and
PIM protection.
4.4.1
Changing Passwords
Changing PIN code. Set it up as the number you like. It is noted that changing PIN can be done only under
starting up PIN.
Changing PIN1: avoid user's SIM card being used illegally. If starting up the function of PIN1 code, input
the password when starting every time. If inputting the mistake PIN1 code with three times, SIM card will be
locked automatically, and there will be some certain information that SIM card has been locked.
Changing PIN2: it is offered by the network provider to protect advanced functions such as charge materials
and FDN service. It does not provide the password normally at present. If inputting the mistake PIN2 code
with three times, PUK2 code should be input to unlock. When changing the locked PIN1 code, require the
PUK code (personal unlock code). PUK code will be with SIM card to provide. If not provided, ask the
service provider to obtain the password. If inputting the mistake PUK code continuously with ten times, the
SIM card will be locked permanently. User cannot change PUK code. If losing, contact with the service
N6602 Mobile Phone Uesr Manual
第 28 页
Advertisement
Table of Contents
