Dial And Answer Telephone; Turn On And Turn Off Phone - NEC N6602 User Manual

Hide thumbs

Table Of Contents

Table of Contents

After the mobile phone is set, you can dial or answer phone. This chapter will provide with all basic

information needed by you.

Note：When dialing and receiving call, the phone searches matched name in the phone book, for the phone

number, it only judges whether the last 11 numbers of the number is same, for other number, it only judges

whether the last 7 numbers of the number is same.

2.1

Turn on and turn off phone

1. Press Pwr key long to turn on phone, the starting animated picture appear.

2. If requiring to input PIN code, please refer to 1.2.3 chapter.

3. In the power on state, press Pwr key long to turn off phone.

2.2

Dial phone

When the mark for network operator appears in the display screen, then phone enter the idle screen, you can

dial or answer calls. The information bar at the left and top corner of screen displays network signal intensity

(four signal bars mean the strongest signal). The barrier has great influence on the communication quality, so

if moving in a small range, the signal intensity can be enhanced remarkably.

The number can be dialed by multiple dialing modes from the idle screen, including: direct dialing, phone

book dialing, rapid dialing and SIM card position dialing.

2.2.1

Direct dialing

Dial domestic phone

The simplest method to dial is to use digital key to input the phone number (if dialing domestic long-

distance number, please add region number), then press Snd key and start call. When dialing, the

display screen will display name and telephone number, after the telephone is connected,

communication duration , another party's phone number or name is displayed.

After using digital key to input telephone, please press Menu key to activate the menu, the following

menu items will appear in the menu.

Select calling to call out telephone

Select save number to save the telephone number (refer to 10.12 chapter for detailed operation)

Select Send SMS to enter short message editing window and finish corresponding operation (refer to

6.2 chapter for operation on short message function);

Select Countdown to start Countdown function (refer to 11.12 chapter for detailed function setting).

After communication terminates, please press Pwr key to hang up the phone. The phone will display

the duration for this communication.

Dial fixed phone extension

Some fixed phone extension can not be directly dialed, you need first dial the host phone, then dial extension.

When you input the telephone number, insert "W" and "P" between host phone number and extension

number, the phone will help you finish dialing and automatic extension dialing. The input method for

inputting "W" and "P" is as follows: when inputting, press # key long (at this time display screen will