Table of Contents
Advertisement
1. To set the alarm time, the radio must be turned off.
2. Press ALARM 1 button (1) once, the alarm time and either Alarm 1 Buzzer
indicator (11) or Alarm 1 Radio indicator (12) is flashing.
3. Press HOUR button (8) for selecting hour. Press MINUTE button (7) for selecting
minutes.
4. After setting the desired alarm time, either press ALARM 1 button (1) again,
or simply wait for 5 seconds, then the display will return to the current time
and the set alarm time is confirmed.
5. Now press ALARM 1 button (1) repeatedly to choose the alarm function status.
The status appears in following sequence with display shown as:
A) Alarm wake to buzzer is set with Alarm 1 Buzzer indicator (11) and Alarm time
is flashing on the display.
B) Alarm wake to radio is set with Alarm 1 Radio indicator (12) and Alarm time is
flashing on the display.
C) Alarm off is set with no indicator is on and current time shown on LED
5 seconds after the desired status is chosen, the display will stop flashing and
change to show the current time. Please make sure the indicator for the
selected status (buzzer or radio) is ON, or no indicator is on in case if you choose
to turn off the alarm.
6. When you set the Alarm 2 time, follow the above step 2 to 5 by using the
ALARM 2 button (2) instead of ALARM 1 button (1). Subsequently, the wake to
buzzer status of alarm time 2 will be indicated by Alarm 2 Buzzer indicator (14).
The wake to radio status of alarm time 2 will be indicated by Alarm 2 Radio
indicator (15). The buzzer sound of Alarm 1 is in different tone with the buzzer
sound of Alarm 2, so it is easy for user to distinguish.
7. When the Alarm is turned on, either :
A) Press ON/OFF button (3) or Alarm 1 button (1) once to switch off the alarm 1.
Press ON/OFF button (3) or Alarm 2 button (2) once to switch off the alarm 2.
The alarm indicator is still on, implying the alarm function is still activated and
turned on again after 24 hours.
B) Press the SNOOZE button (9), the alarm sounds will stop temporarily for 9
minutes and will sound again after. [See SNOOZE SETTING below]
C) If no button is pressed after the alarm sounds, the alarm will keep turned on
and then turned off in 1 hour after the alarm time.
D) To disable the alarm setting, press ALARM 1 button (1) or ALARM 2 button (2)
until their indicators (radio or buzzer) disappear on the display.
Advertisement
Table of Contents
