Husqvarna K 770 Dry Cut Operator's Manual page 107

7. Starting instruction decal
8. Choke control with start throttle lock
9. Throttle trigger lockout
10. Rear handle
11. Throttle trigger
12. Stop switch
13. Disconnection function for OilGuard
14. Starter handle
15. Starter housing
16. Muffler
17. Cutting equipment decal
18. Blade guard extender
19. Dust shield
20. Cutting direction
21. Flange, spindle, bushing
22. Operator's manual
23. Combination spanner
24. Dust bag
25. Extension hose (2 m)
26. Hose
27. Rear belt guard
28. Fan housing
29. Type plate
30. Belt tensioner screw
31. Front belt guard
32. Lock screws for belt adjustment
33. Connection bend
34. Decompression valve
35. Air purge bulb
36. Fuel cap
Symbols on the product
WARNING! The product can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always use approved personal protective
equipment. Refer to
equipment on page 110 .
This product is in accordance with
applicable EC directives.
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
861 - 004 - 27.02.2019
Personal protective
WARNING! Kickbacks can be sudden, rapid
and violent and can cause life threatening
injuries. Read and understand the
instructions in the manual before using the
Kickback on page 113 .
product. Refer to
WARNING! Sparks from the cutting blade
can cause fire in combustible materials such
as: petrol (gas), wood, clothes, dry grass,
etc.
WARNING! Ensure the blades are not
cracked or damaged in any other way.
WARNING! Do not use circular saw blades.
WARNING! Do not use bonded abrasive
blades.
WARNING! For dry cutting only.
Use diamond blades only.
Choke
Air purge bulb
Decompression valve
Starter rope handle
Use a fuel mixture of gasoline and oil.
107