Repackaging Guidelines - DJH MEK RUB TEST MACHINE User Manual

REPACKAGING GUIDELINES

Use the original packing materials whenever possible. If you have already disposed of your packing material,
please take care in making sure that the equipment is well packaged and protected. You can also request the proper
shipping container from DJH Designs. (Container cost and shipping charges will apply)
Instructions for packing MEK Rub Test Machine in ISPM15 compliant crate.
1. Safety shield must not be installed when
repackaging. Remove safety shield and place
washer/screws back into the inserts safely as shown.
2. Disconnect reservoire & air supply lines prior to
packaging.
3. Disconnect & uninstall MEK reservoire by
removing the two screws. Once removed, reinstall
screws to secure them and tighten them slightly.
25