Power Cord for long periods of time, unplug it from the wall outlet and The removable power cord that is shipped with the Ultra-X13 is disconnect any antenna or cable system. This will prevent specifically designed to be used with this product. DO NOT damage to the unit due to lighting and power-line surges.
If you do not intend to use Please Read First the Ultra-X13 for any considerable length of time, disconnect A Brief Note on This Manual the plug from the AC outlet. If the power cord is replaced, make certain that it is of similar gauge.
J. Master Power Switch (Pages 6-7) Use this switch to turn the AC power to the Ultra-X13 subwoofer on or off. If the unit will not be used for an extended period of time, we recommend setting this switch to OFF.
3. Connect one end of the subwoofer cable to comprise the rest of your system or what your the subwoofer output on the receiver or favorite movie or music is, the Ultra-X13 is up to processor. the task of completing the sonic presentation by 4.
An easy way to find the right spot to place your subwoofer amplifier. new Ultra-X13 is to experiment with what we call the “Subwoofer Switch Trick.” This process puts To connect an Ultra-X13 Subwoofer using...
The Ultra-X13 will also switch out of standby mode when a signal is detected. In “Always On” mode, the Ultra-X13 will remain on even if no signal is present. Note: Some users may connect the Ultra-X13’s...
On the opposite end of the Y-adapter you will now have two separate subwoofer outputs, one for each sub. When using the XLR input on the Ultra-X13, you may also connect a second subwoofer to the first subwoofer using the Direct Pass-Thru output (I).
Outlaw Service Information The Outlaw Audio Ultra-X13 Subwoofer does not contain any user serviceable parts. If you suspect a problem that may require service assistance, call us at 866-688-5292. It is important that only a service agent authorized by Outlaw Audio carry out any repairs.
Ultra-X13 section of our website (www.outlawaudio.com), or enter the Ultra-X13 Section of our Outlaw Saloon. If these solutions do not rectify a problem, or if the problem persists, If your problem persists, please call us at 866-OUTLAWS (688-5297) or 866-OUTLAWA (688-5292).
• Damage from failure to follow instructions In the event that you wish to return your Outlaw contained in this Owner’s Manual • Product back to us, for any reason, please call to Damage from the performance of repairs by arrange for a Return Authorization Number.
Need help?
Do you have a question about the Ultra-X13 and is the answer not in the manual?
Questions and answers