Intel H61 User Manual page 28

Use this item to enable or disable PS2 KB/MS wakeup function. This function is
only supported when ERP Function is set as [Disabled].
PCI PME Wakeup
Use this item to enable or disable S3/S4/S5 PCI PME wakeup function. This
function is only supported when ERP Function is set as [Disabled].
 CPU Configuration
Press [Enter] to view detailed CPU information and make settings for the following
sub-items:
Hyper-Threading
The optional settings: [Disabled]; [Enabled].
[Enabled]: for Windows XP and Linux (OS optimized for Hyper-Threading
Technology).
[Disabled]: for other OS (OS optimized not for Hyper-Threading Technology).
*This item might not be available depending on configuration.
Active Processor Cores
Use this item to select number of cores to enable in each processor package.
Limit CPUID Maximum
The optional settings are: [Disabled]; [Enabled].
This item should be set as [Disabled] for Windows XP.
Execute Disable Bit
The optional settings are: [Disabled]; [Enabled].
Intel Virtualization Technology
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], a VHM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
Hardware Prefetcher
The optional settings: [Enabled]; [Disabled].
Use this item to turn on/off the Mid Level Cache (L2) streamer prefetcher.
Adjacent Cache Line Prefetch
The optional settings: [Enabled]; [Disabled].
Use this item to turn on/off prefetching of adjacent cache lines.
 SATA Configuration
Serial-ATA Controller (s)
The optional settings are: [Disabled]; [Enabled].
Use this item to enable or disable SATA device.
SATA Mode Selection
The optional settings are: [IDE]; [AHCI].
*When the SATA Mode selection is set as [AHCI] mode, user can make further
settings to enable or disable Port1/2/3/4.
Port 1/ Port 2/ Port 3/ Port 4
24