Intel H61 User Manual page 25

Launch OpROM Support
Launch External PXE OpROM/Launch LAN1 PXE OpROM//Launch LAN2 PXE
OpROM
Use this item to enable or disable boot option for legacy network devices.
* The above items are for NLH61 & NLH61-6C Series.
Launch Storage OpROM
Use this item to enable or disable boot option for legacy mass storage devices with
option ROM.
* The above item is for NLH61 & NLH61-6C Series.
Launch PXE OpROM policy
This option controls the execution of UEFI and Legacy PXE OpROM.
The optional settings are: [Do not launch]; [UEFI only]; [Legacy only]; [Legacy first];
[UEFI First].
* The above item is for NLB75 Series.
Launch Storage OpROM policy
This option controls the execution of UEFI and Legacy Storage OpROM.
The optional settings are: [Do not launch]; [UEFI only]; [Legacy only]; [Legacy first];
[UEFI First].
* The above item is for NLB75 Series.
Launch Video OpROM policy
This option controls the execution of UEFI and Legacy Video OpROM.
The optional settings are: [Do not launch]; [UEFI only]; [Legacy only]; [Legacy first];
[UEFI First].
* The above item is for NLB75 Series.
Other PCI device ROM priority
This item is for PCI devices other than Network, Mass storage or video defines which
OpROM to launch.
The optional settings are: [UEFI OpROM]; [Legacy OpROM].
* The above item is for NLB75 Series.
ERP Function
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable ERP function for this board. This item should be set
as [Disabled] if you wish to have Active All Wakeup Function.
 PCI Subsystem Settings
Press [Enter] to enter and make settings for PCI Express Settings and PCI Express
GEN2 Settings.
 PCI Express Settings
Press [Enter] to make settings for the following PCI Express Device Register
Settings:
PCI Express Device Register Settings
21