Machine Storage; Service And Repair - RIDGID 535 Manual Chuck Manual

Threading Machines, see the Ridge Tool Catalog
online at RIdGId.com or call Ridge Tool Technical
Service department (800) 519-3456, from the u.S.
and Canada.
Thread Cutting oil Information
Read and follow all instructions on the threading oil label and
Safety Data Sheet (SDS). Specific information about
RIDGID Thread Cutting Oils, including Hazard Identification,
First Aid, Fire Fighting, Accidental Release Measures,
Handling and Storage, Personal Protective Equipment,
Disposal and Transportation, is included on the container
and SDS. SDS is available at RIDGID.com or by contacting
Ridge Tool Technical Service Department at (800) 519-
3456 in U.S. and Canada or rtctechservices@emerson.com.

Machine Storage

The Threading Machines must be kept
WARNING
indoors or well covered in rainy weather. Store the machine
in a locked area that is out of reach of children and people
unfamiliar with threading machines. This machine can
cause serious injury in the hands of untrained users.

Service And Repair

WARNING
Improper service or repair can make machine
unsafe to operate.
The "Maintenance Instructions" will take care of most of
the service needs of this machine. Any problems not ad-
dressed by this section should only be handled by an
authorized RIDGID service technician.
Tool should be taken to a RIDGID Independent Service
Center or returned to the factory. Only use RIDGID service
parts.
999-998-086.10_REV. C
535 Manual Chuck/535 Auto Chuck Threading Machines
disposal
Parts of the Threading Machine contain valuable materi-
als and can be recycled. There are companies that spe-
cialize in recycling that may be found locally. Dispose of the
components and any waste oil in compliance with all
applicable regulations. Contact your local waste man-
agement authority for more information.
longer usable must be collected separately and disposed
of in an environmentally correct manner.
For EC Countries: Do not dispose of elec-
trical equipment with household waste!
According to the European Guideline 2012/ -
19/ EU for Waste Electrical and Electronic
Equipment and its implemen tation into nation-
al legislation, electrical equipment that is no
21