Installation - AEG SKS71001F0 User Manual

36

INSTALLATION

POSITIONING
WARNING!
If you are discarding an old ap-
pliance that has a lock or catch
on the door, you must ensure
that it is made unusable to pre-
vent young children being trap-
ped inside.
The appliance shall have the
plug accessible after installation.
Install this appliance at a location where
the ambient temperature corresponds
to the climate class indicated on the
rating plate of the appliance:
Cli-
mate
class
SN
N
ST
VENTILATION REQUIREMENTS
5 cm
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
min.
200 cm
2
min.
200 cm
Cli- Ambient temperature
mate
class
T +16°C to + 43°C
ELECTRICAL CONNECTION
Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your domes-
tic power supply.
The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with cur-
rent regulations, consulting a qualified
electrician.
The manufacturer declines all responsi-
bility if the above safety precautions are
not observed.
This appliance complies with the E.E.C.
Directives.
The airflow behind the appliance must
be sufficient.
2