AEG SKS71001F0 User Manual page 23

1. Power cord must not be length-
ened.
2. Make sure that the power plug is
not squashed or damaged by the
back of the appliance. A squash-
ed or damaged power plug may
overheat and cause a fire.
3. Make sure that you can come to
the mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose,
do not insert the power plug.
There is a risk of electric shock or
fire.
6. You must not operate the appli-
ance without the lamp cover (if
foreseen) of interior lighting.
• This appliance is heavy. Care should
be taken when moving it.
• Do not remove nor touch items from
the freezer compartment if your
hands are damp/wet, as this could
cause skin abrasions or frost/freezer
burns.
• Avoid prolonged exposure of the ap-
pliance to direct sunlight.
• Bulb lamps (if foreseen) used in this
appliance are special purpose lamps
selected for household appliances
use only. They are not suitable for
household room illumination.
DAILY USE
• Do not put hot pot on the plastic
parts in the appliance.
• Do not store flammable gas and liq-
uid in the appliance, because they
may explode.
• Appliance's manufacturers storage
recommendations should be strictly
adhered to. Refer to relevant instruc-
tions.
CARE AND CLEANING
• Before maintenance, switch off the
appliance and disconnect the mains
plug from the mains socket.
• Do not clean the appliance with met-
al objects.
• Regularly examine the drain in the re-
frigerator for defrosted water. If nec-
essary, clean the drain. If the drain is
blocked, water will collect in the bot-
tom of the appliance.
INSTALLATION
For electrical connection care-
fully follow the instructions given
in specific paragraphs.
• Unpack the appliance and check if
there are damages on it. Do not con-
nect the appliance if it is damaged.
Report possible damages immedi-
ately to the place you bought it. In
that case retain packing.
• It is advisable to wait at least four
hours before connecting the appli-
ance to allow the oil to flow back in
the compressor.
• Adequate air circulation should be
around the appliance, lacking this
leads to overheating. To achieve suf-
ficient ventilation follow the instruc-
tions relevant to installation.
• Wherever possible the back of the
product should be against a wall to
avoid touching or catching warm
parts (compressor, condenser) to
prevent possible burn.
• The appliance must not be located
close to radiators or cookers.
• Make sure that the mains plug is ac-
cessible after the installation of the
appliance.
• Connect to potable water supply on-
ly (If a water connection is foreseen).
SERVICE
• Any electrical work required to do
the servicing of the appliance should
be carried out by a qualified electri-
cian or competent person.
• This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.
ENGLISH
23