Advertisement
Cautions & Warnings!
Reader antennas should be positioned so that personnel in
the area for prolonged periods may safely remain at least 23
cm (9 in) in an uncontrolled environment from the antenna's
surface. See FCC OET Bulletin 56 "Hazards of radio
frequency and electromagnetic fields" and Bulletin 65
"Human exposure to radio frequency electromagnetic fields."
System Requirements
To operate the reader and the Alien RFID Gateway demo
software you will need the following:
•
PC running Windows® 98 or higher, with minimum 200
MHz speed, and 128 MB RAM
•
Minimum of 45 MB of available disk space
•
Ethernet connectivity
•
CD-ROM drive
•
120/220 VAC standard power outlet
Alien Technology Corp.
18220 Butterfield Blvd.
Morgan Hill, CA 95037
Tel 408-782-3900
Fax 408-782-3910
http://www.alientechnology.com
8102003-000 Rev 01
ALIEN TECHNOLOGY
QUICK
INSTALLATION
GUIDE
ALR-9800
July 12, 2005
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Alien ALR-9800
Summary of Contents for Alien ALR-9800
- Page 1 Bulletin 65 “Human exposure to radio frequency electromagnetic fields.” QUICK System Requirements INSTALLATION To operate the reader and the Alien RFID Gateway demo software you will need the following: GUIDE • PC running Windows® 98 or higher, with minimum 200 MHz speed, and 128 MB RAM •...
- Page 2 To launch the Alien RFID Gateway software, double-click on its icon network switch. You must use TCP/IP to communicate with the (located directly on the desktop, and under Start / Programs / Alien reader. RFID / Gateway / Alien RFID Gateway).
Need help?
Do you have a question about the ALR-9800 and is the answer not in the manual?
Questions and answers