Maintenance; Maintenance Schedule - Snapper 150Z Series Operator's Manual

MAINTENANCE SCHEDULE

The following schedules should be followed for normal care of your rider and mower.
RIDER MAINTENANCE, All Models
Clean Debris from Rider and Engine Compartment *
Clean Debris from Engine Cooling Areas & Air Filter *
Check Tire Pressure
Lubricate Rider & Mower *
Clean Deck & Check/Replace Mower Blades
Clean Battery & Cables
Check Rider Safety System **
Check / Adjust PTO Clutch
ENGINE MAINTENANCE,
18.5, 21HP Briggs & Stratton
Check Engine Oil Level *
Service Air Pre-Cleaner *
Change Oil *
Service Air Filter *
Change Oil & Filter *
Clean Cooling Fins *
Replace Air Filter *
Replace Spark Plug
Replace Fuel Filter †
Check Valve Clearance †
ENGINE MAINTENANCE,
24, 26HP Briggs & Stratton
Check Engine Oil Level *
Replace Air Filter *
Change Oil *
Change Oil & Filter *
Clean Cooling Fins *
Replace Spark Plugs
Replace Fuel Filter †
Clean Combustion Chamber
* More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
† These services should be performed by your dealer.

MAINTENANCE

Before
Each Use
•
•
8 Hours or 25 Hours or
Daily Every
Season
•
•
8 Hours 25 Hours
or Daily or Every
Season
•
16
Spring 8 25
& Fall Hours Hours
•
•
•
•
50 Hours or 100 Hours or
Every Every
Season Season
•
•
50 Hours 100 Hours
or Every or Every
Season Season
•
•
100 200 Yearly
Hours Hours
•
• •
•
Yearly
•
•
•
•
•
•
100-400
Hours
•
•
•
•
•