Buttons For Adjusting The Temperature; Temperature Displays - AEG SANTO Series Operating Instructions Manual

Appliance Description

Buttons for Adjusting the Temperature

• The temperature display is switched over from the display of the
ACTUAL temperature (Temperature display is illuminated) to the dis-
play of the DESIRED temperature (Temperature display flashes) by
pressing one of the two buttons, „+" (WARMER) or „-" (COLDER).
• Each time one of the two buttons is pressed again the DESIRED tem-
perature is adjusted by 1 °C.
• If neither button is pressed, the temperature display automatically
switches back after a short period (approx. 5 sec.) to the display of
the ACTUAL temperature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge or the
freezer compartment. The DESIRED temperature is indicated by flashing
numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the
fridge or the freezer compartment. The ACTUAL temperature is indi-
cated with illuminated numbers.

Temperature Displays

• During normal operation, the temperature currently present in the
fridge or the freezer compartment (ACTUAL temperature) is displayed.
• When the temperature is being adjusted a flashing display indicates
the fridge or the freezer compartment temperature currently set
(DESIRED temperature).
• If there is a fault in the appliance the temperature display shows:
– a square in the refrigerator compartment's temperature display
indicates a malfunction in the refrigerator compartment,
– a square in the freezer compartment's temperature display
indicates a malfunction in the freezer compartment.
44
The temperature is adjusted using the „+" (WARMER) and
„-" (COLDER) buttons.
These buttons are connected to the temperature display.
The temperature displays shows several
types of information.