JVC KD-AR480 Instructions Manual page 14

Indications
SCROLL* 5
Scroll
L/O MODE
Line output
mode
WOOFER* 6
Subwoofer
cutoff frequency
EXT IN* 7
External input
AUX ADJ
Auxiliary input
level adjustment
TAG DISP
Tag display
AMP GAIN
Amplifier gain
control
AREA
Tuner channel
interval
IF BAND
Intermediate
frequency band
*
5 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
6 Displayed only when "L/O MODE" is set to "WOOFER."
*
7 Displayed only when one of the following sources is selected—FM, AM, CD, or AUX IN.
14
Item
( : Initial)
• ONCE
• AUTO
• OFF
• REAR
• WOOFER
• LOW
• MID
• HIGH
• CHANGER
• EXT IN
A.ADJ 00 — A.ADJ 05 : Adjust the auxiliary input level to avoid the sudden increase of the
• TAG ON
• TAG OFF
• LOW PWR
• HIGH PWR
• AREA US
• AREA EU
• AREA SA
• AUTO
• WIDE
Setting, [reference page]
: Scrolls the disc information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
• Pressing D DISP for more than one second can scroll the display
regardless of the setting.
: Select if both the LINE OUT terminals are used for connecting the
speakers (through an external amplifier).
: Select if the REAR LINE OUT terminals are used for connecting a
subwoofer (through an external amplifier).
: Frequencies lower than 90 Hz are sent to the subwoofer.
: Frequencies lower than 135 Hz are sent to the subwoofer.
: Frequencies lower than 180 Hz are sent to the subwoofer.
: To use a JVC CD changer, [9], a JVC compatible satellite
(SIRIUS/XM) tuner, [15], an Apple iPod or a JVC D. player, [18].
: To use any other external component than the above, [20].
output level when changing the source from external component
connected to the AUX input jack on the control panel.
: Shows the Tag information while playing MP3/WMA tracks, [10].
: Cancels.
: VOL 00 – VOL 30 (Select this if the maximum power of the speaker
is less than 50 W to prevent damaging the speaker.)
: VOL 00 – VOL 50
: When using in North/Central/South America. AM/FM intervals are
set to 10 kHz/200 kHz.
: When using in any other areas except North/Central/South
America. AM/FM intervals are set to 9 kHz/50 kHz (100 kHz during
auto search).
: When using in South American countries. AM/FM intervals are set
to 10 kHz/100 kHz.
: Increases the tuner selectivity to reduce interference noises
between close stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.